Billet Specialties Bonneville G Vintage Series Wheels

[69NovaYenko]

Has this style of wheel been kitted or is there a comparable wheel available by one of the resin casters. Thanks for looking and any leads.

[Fat Brian]

There's a seller on ebay that does two similar style wheels that are 3d printed. I'm not going to lie, there aren't the highest quality printed wheels I've gotten. But, they seem to be workable and will probably look the part with some cleanup and a few coats of paint.

https://www.ebay.com/itm/Resin-21-20-Inch-American-Racing-Salt-Flats-model-car-wheels-1-24-1-25-scale-/324916764825?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

https://www.ebay.com/itm/Resin-Halibrand-Dragmaster-style-model-car-wheels-1-24-1-25-scale-21-20-Inch-/224629726127?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[Plowboy]

Pegasus makes a similar wheel called the Shuey. The slots are shaped differently. They come with three bar knock offs. But, I trim the bars off.

There's also the Hella by Pegasus.

 

[MeatMan]

3D Scale has a similar product at about the cost of a kit.

https://www.3dscaleparts.com/product-page/1-25-speedway-19-shallow-and-deep-wheels-on-big-and-little-vintage-tires

[Claude Thibodeau]

Hi Greg!

At WM, i bought a Maisto 1/24 diecast 70 Chevy pick-up last year. It had two sets of wheels: Cragar Classic style, and an alternate set: just what you look for. They were painted gunmetal, and are 4 identical "large size-low profile tire" size. Let's say 20" with 255- 35 series tires. The stem at the back is easy to adapt to about any build.

Hope this helps!

CT 

[Claude Thibodeau]

Hi again!

Revell also had a 57 Chevy snap kit with fairly similar wheels. See below...

CT