David Posted June 6, 2022 Posted June 6, 2022 On 6/4/2022 at 12:25 PM, Texas_3D_Customs said: You know this was on my list and with a little help from my FE I think it's a good idea. Please include cam covers with the proper width and height, the soft blended radii, and the Ford logo with the 427 SOHC lettering if you proceed. To me those features are iconic to the 427 SOHC and are not always reproduced correctly. The Moebius engines cam covers are nice but I would like to see the logo and lettering added. Thank you for your efforts.
afx Posted June 7, 2022 Posted June 7, 2022 Lettering on the valve/cam covers was not always present particularly back in the day. 2
David Posted June 7, 2022 Posted June 7, 2022 2 hours ago, afx said: Lettering on the valve/cam covers was not always present particularly back in the day. I know, I just prefer that it is there. 3D printed parts could include or exclude it, and I would think should be able to capture the sizes and curves of the prototype covers (and other components of the engine) accurately.
TransAmMike Posted June 16, 2022 Author Posted June 16, 2022 On 6/4/2022 at 2:25 PM, Texas_3D_Customs said: You know this was on my list and with a little help from my FE I think it's a good idea. Hi Charles, was wondering if you have given any more thought to doing the Hilborne injection for the SOHC Ford engine?
Texas_3D_Customs Posted June 19, 2022 Posted June 19, 2022 On 6/16/2022 at 4:42 PM, TransAmMike said: Hi Charles, was wondering if you have given any more thought to doing the Hilborne injection for the SOHC Ford engine? I have, but Scott is handling pretty much all of the modeling now as I can barely keep up with printing.
TransAmMike Posted June 19, 2022 Author Posted June 19, 2022 10 minutes ago, Texas_3D_Customs said: I have, but Scott is handling pretty much all of the modeling now as I can barely keep up with printing. Thanks for the reply Charles. I'm gonna put the Comet I need it for on hold for now.
Oldmopars Posted July 7, 2022 Posted July 7, 2022 On 6/19/2022 at 11:50 AM, TransAmMike said: Thanks for the reply Charles. I'm gonna put the Comet I need it for on hold for now. Work has begun on creating a new 427 Cammer. 1
TransAmMike Posted July 8, 2022 Author Posted July 8, 2022 11 hours ago, Oldmopars said: Work has begun on creating a new 427 Cammer. Is this an item you are going to produce? Complete engine?
Oldmopars Posted July 8, 2022 Posted July 8, 2022 4 hours ago, TransAmMike said: Is this an item you are going to produce? Complete engine? Yes, the plan is to create an accurate 427 SOHC and it will be for sale through Texas 3D Customs. And yes, complete engine. 1
TarheelRick Posted July 8, 2022 Posted July 8, 2022 8 hours ago, Oldmopars said: Yes, the plan is to create an accurate 427 SOHC and it will be for sale through Texas 3D Customs. And yes, complete engine. Will this engine be available with different forms of induction, i.e. 2X4, 1X4, supercharged, and/or fuel injected? Or will it be basic long block and consumer provides own induction? I am looking for a 2X4 version.
Oldmopars Posted July 8, 2022 Posted July 8, 2022 37 minutes ago, TarheelRick said: Will this engine be available with different forms of induction, i.e. 2X4, 1X4, supercharged, and/or fuel injected? Or will it be basic long block and consumer provides own induction? I am looking for a 2X4 version. I haven't got there yet, so I am open. However I am thinking 2x4 and Hilborn FI. 1
Texas_3D_Customs Posted December 16, 2022 Posted December 16, 2022 With a lot of help from AJ soon now 5
Texas_3D_Customs Posted December 16, 2022 Posted December 16, 2022 Well it's close, I have just a couple more things to do. Like key the heads play with a different tranny I recently obtained, and a few more of the small things I do. 1
Bainford Posted December 16, 2022 Posted December 16, 2022 I appreciate your attention to detail. It's worth taking the time to get these things right.
TransAmMike Posted December 16, 2022 Author Posted December 16, 2022 1 hour ago, Texas_3D_Customs said: Well it's close, I have just a couple more things to do. Like key the heads play with a different tranny I recently obtained, and a few more of the small things I do. I'm all a tingle??. Keep us posted Charles.
Bainford Posted December 17, 2022 Posted December 17, 2022 That looks wicked! Beautiful rendering. Is the Toploader part of the package?
Fat Brian Posted December 18, 2022 Posted December 18, 2022 5 hours ago, Bainford said: That looks wicked! Beautiful rendering. Is the Toploader part of the package? If it's anything like his other engines you will have a choice between a few transmissions you can get with it.
Texas_3D_Customs Posted December 18, 2022 Posted December 18, 2022 4 hours ago, Fat Brian said: If it's anything like his other engines you will have a choice between a few transmissions you can get with it. So as of now it's the only one, but I will most likely adapt the C6 to it, but forget renderings here's my first test print. 3
Texas_3D_Customs Posted December 18, 2022 Posted December 18, 2022 Fine you guys twisted my arm here's the C6 mates to the Cammer 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now