Ben Posted July 5, 2018 Posted July 5, 2018 13 hours ago, Greg Myers said: How do the scales match up. the HEMI being rather large at 1/4th scale ? I haven’t matched them yet. I thought the chassis was 1/4 scale too?
Ben Posted July 5, 2018 Posted July 5, 2018 3 minutes ago, Ben said: I haven’t matched them yet. I thought the chassis was 1/4 scale too? Yeah, the chassis is 1/4 scale too. Been a few years since I looked at it. The HEMI should fit with minor modifications I would think?
Greg Myers Posted July 5, 2018 Author Posted July 5, 2018 That should be quite stunning Ben. Be sure to do an "In Progress" Thread.
Ace-Garageguy Posted August 3, 2018 Posted August 3, 2018 (edited) On 7/4/2018 at 11:51 AM, SfanGoch said: The original Renwal V-8 available on ebay. Priced at $129.99 with free shipping. Pretty good price and it's complete. Renwal The Visible V-8 The price came down. I bit. We'll see if it's complete. This is one kit you DO NOT WANT if it's been started and glued anywhere, but the early flywheel and electric motor drive parts might make it worth restoring if anything is bodged, and/or missing. Edited August 3, 2018 by Ace-Garageguy
unclescott58 Posted March 15, 2020 Posted March 15, 2020 Here's two I just recently built. In fact, I just finished the Revell Visible V-8 last night. The Franzis Mustang V-8 I built in the evening about a week ago. I have more info in a thread I started in the large scale section here.
Greg Myers Posted March 21, 2020 Author Posted March 21, 2020 I saw somewhere that Atlantis was going to reissue this kit.
Straightliner59 Posted March 21, 2020 Posted March 21, 2020 On 7/4/2018 at 8:28 AM, Greg Myers said: There are also a plethora of 1/6th scale die cast kits from the likes of Liberty, Revell, Hawk and Testors. Three years ago, I bought a three kit assortment of Hawk engines for about $60. I started working on one, but, couldn't "leave it alone", and got sidetracked by other projects, so, it's sitting...
iBorg Posted March 21, 2020 Posted March 21, 2020 Are the Liberty and the Revell kits the same engines with Liberty's being assembled?
unclescott58 Posted March 21, 2020 Posted March 21, 2020 Here's another one I got yesterday from Amazon. Four hours later, I had it finished. It's the 1/4 scale Porsche 911 by Franzis. I do question the scale being listed as 1/4 when you compare it to their own 1/3 Mustang motor. And The Renwal/Revell Visiable V-8. Also claimed to in 1/4 scale. Still a very nice kit.
SCRWDRVR Posted March 21, 2020 Posted March 21, 2020 On 8/3/2018 at 2:57 PM, OldTrucker said: I had this but gave it to my son! I have this one but have not built it as of yet...
Daddyfink Posted March 22, 2020 Posted March 22, 2020 Too bad Aurora cancelled this line before the 426 Hemi was finalized. But the two that came out where and are fantastic
Greg Myers Posted March 22, 2020 Author Posted March 22, 2020 On 3/21/2020 at 9:11 AM, iBorg said: Are the Liberty and the Revell kits the same engines with Liberty's being assembled? Yes. The display stands often say "Liberty" on them, Hawk as well
peteski Posted March 22, 2020 Posted March 22, 2020 My contribution to this thread is a Revell 1:6 Hemi 426 engine I built over 10 years ago. The kit seems to have been produced in early 2000s. This is not something I usually build, but for some reason it attracted me. It was a pre-painted kit, but that didn't stop me from doing some additional painting and adding bunch of detail parts.
mk11 Posted March 22, 2020 Posted March 22, 2020 On 7/5/2018 at 10:07 AM, Ben said: The HEMI should fit with minor modifications I would think? With a little help from an a-daptor kit.. as Mr Cash put it... Spotted this pre-assembled one at a swap meet. Wish I'd kept the pic of the big scale Ford Indy engine I missed on the big auction site a few years back.
junkyardjeff Posted December 8, 2020 Posted December 8, 2020 That Parma Chevy V8 sure looks like a Ford Y block.
Greg Myers Posted December 8, 2020 Author Posted December 8, 2020 (edited) This all metal kit really intrigues me. However, at close to $400 it ain't gonna happen Edited December 8, 2020 by Greg Myers
Brian Austin Posted December 9, 2020 Posted December 9, 2020 (edited) Too bad Renwall didn't do a Visible Allison engine kit ? How about a DeDion or Mercedes? https://www.ministeam.com/acatalog/Classic_Mottors.html You can purchase metal castings to make working steam engines of various kinds. https://www.ministeam.com/acatalog/Casting-Kits.html Here's a fully-functioning miniature V8 https://www.ministeam.com/acatalog/Conley-V8-Stinger-609-Engine-COStinger609.html#SID=327 Edited December 9, 2020 by Brian Austin
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now