Goodwrench3 Posted January 10, 2019 Posted January 10, 2019 Uh oh... OOPS. I took the shrink wrap off already and glued the engine block halves together. Sorry -- I thought we were starting already .
DRIPTROIT 71 Posted January 10, 2019 Author Posted January 10, 2019 46 minutes ago, Goodwrench3 said: Uh oh... OOPS. I took the shrink wrap off already and glued the engine block halves together. Sorry -- I thought we were starting already . That's no problem. The proposed rules and entry lists were on separate threads. That's my fault. That's why I put them together now. Besides, a lot of resin engines, both halves are already together.
Repstock Posted January 10, 2019 Posted January 10, 2019 I've been looking for a reason to finish this..I will be using kit parts for engine and frame. Does the cab have to be from a kit?
Goodwrench3 Posted January 10, 2019 Posted January 10, 2019 8 minutes ago, DRIPTROIT 71 said: That's no problem. The proposed rules and entry lists were on separate threads. That's my fault. That's why I put them together now. Besides, a lot of resin engines, both halves are already together. OK Thx ! I also found it quite interesting that in this Round 2 re-release of the kit, none of the part numbers on the parts trees match the part numbers on the instructions
DRIPTROIT 71 Posted January 10, 2019 Author Posted January 10, 2019 33 minutes ago, Repstock said: I've been looking for a reason to finish this..I will be using kit parts for engine and frame. Does the cab have to be from a kit? The build doesn't have to be from a kit, it can be scratch built. You have a lot done, but if you were to cast it in resin it would amount to the same starting point for someone else using the resin conversion. I don't have a problem unless someone else does, so I'll put you down. The main reason for rule #5 is keep anyone from having a big head start. The way I see it, you are starting with a cab conversion that you've mastered. However, If anyone who is entered into this contest has a problem with this entry, please send me a private message and we'll discuss it further. I want to try to make everyone feel like they're being treated fairly.
tbill Posted January 10, 2019 Posted January 10, 2019 (edited) I myself don’t see it as an issue, nor do I think anyone else will, I think we are all on the same page, it’s fun and we get a little online comarraderie (sp? glad auto correct doesn’t work when you really need it, lol) from being in the build off. I’m more concerned with some of us finishing....., that’s more for making fun of myself, as I get distracted easily....... pretty sure jeff ( gotnitro) will see something shiny and be off on a tangent, lol......, just kidding buddy? Edited January 10, 2019 by tbill
cowboy rich Posted January 10, 2019 Posted January 10, 2019 5 hours ago, Goodwrench3 said: OK Thx ! I also found it quite interesting that in this Round 2 re-release of the kit, none of the part numbers on the parts trees match the part numbers on the instructions I found the same thing but if you have the sheet for a California hauler they have correct numbers for the drivetrain, and engine if needed.
Repstock Posted January 11, 2019 Posted January 11, 2019 5 hours ago, DRIPTROIT 71 said: The build doesn't have to be from a kit, it can be scratch built. You have a lot done, but if you were to cast it in resin it would amount to the same starting point for someone else using the resin conversion. I don't have a problem unless someone else does, so I'll put you down. The main reason for rule #5 is keep anyone from having a big head start. The way I see it, you are starting with a cab conversion that you've mastered. However, If anyone who is entered into this contest has a problem with this entry, please send me a private message and we'll discuss it further. I want to try to make everyone feel like they're being treated fairly. If anyone does have a problem with this, I won't be offended at all. The last thing I want to do is cause a problem. If this is disqualified, I have another option.
DRIPTROIT 71 Posted January 11, 2019 Author Posted January 11, 2019 1 minute ago, Repstock said: If anyone does have a problem with this, I won't be offended at all. The last thing I want to do is cause a problem. If this is disqualified, I have another option. I don't think anyone will have a problem and I am personally looking forward to seeing this one completed. Old square cabovers are my favorite.
Goodwrench3 Posted January 11, 2019 Posted January 11, 2019 1 hour ago, cowboy rich said: I found the same thing but if you have the sheet for a California hauler they have correct numbers for the drivetrain, and engine if needed. Thx -- it's not a big deal. You don't really need the part numbers to identify the parts. I just found it strange that they couldn't get the "basics" correct in the instructions for a kit that has been around forever. I built this same kit 40 years ago when i was a teenager.
Goodwrench3 Posted January 11, 2019 Posted January 11, 2019 1 hour ago, tbill said: I myself don’t see it as an issue, nor do I think anyone else will, I think we are all on the same page, it’s fun and we get a little online comarraderie (sp? glad auto correct doesn’t work when you really need it, lol) from being in the build off. I’m more concerned with some of us finishing....., that’s more for making fun of myself, as I get distracted easily....... pretty sure jeff ( gotnitro) will see something shiny and be off on a tangent, lol......, just kidding buddy? I agree with tbill re: " I’m more concerned with some of us finishing..." -- Hopefully with some encouragement from the group I'll actually FINISH one this go-around. That alone would be a huge win for me !
gotnitro? Posted January 11, 2019 Posted January 11, 2019 Thanks Tom I needed a laugh, I'm in tears after reading this.. 3 hours ago, tbill said: pretty sure jeff ( gotnitro) will see something shiny and be off on a tangent, lol......, just kidding buddy?
jacobus Posted January 11, 2019 Posted January 11, 2019 Hello everybody , and yes ii am in to do a build again , hope this year go,s better than 2018 [ that is a lot of projects to finishd ] but now i wil move on what i wil build i let you know in a couple of day,s and your right about it , FUN and Plesure jacobus
RipVan Posted January 11, 2019 Posted January 11, 2019 Please add me in the rookie class for the Mack DM600. Steve aka Rip
DrKerry Posted January 11, 2019 Posted January 11, 2019 Hey Brian, is this an open theme again? Anything can be built?
DrKerry Posted January 11, 2019 Posted January 11, 2019 On 1/10/2019 at 11:32 AM, Goodwrench3 said: Uh oh... OOPS. I took the shrink wrap off already and glued the engine block halves together. Sorry -- I thought we were starting already . That’s it you’re done! Put it back in the box and wait!! Lol ?
DRIPTROIT 71 Posted January 11, 2019 Author Posted January 11, 2019 1 minute ago, DrKerry said: Hey Brian, is this an open theme again? Anything can be built? Anything above light commercial 1/25 or 1/24 scale.
DRIPTROIT 71 Posted January 11, 2019 Author Posted January 11, 2019 1 hour ago, RipVan said: Please add me in the rookie class for the Mack DM600. Steve aka Rip You're in.
DrKerry Posted January 11, 2019 Posted January 11, 2019 8 minutes ago, DRIPTROIT 71 said: Anything above light commercial 1/25 or 1/24 scale. Ok! See what I can stir up! Getting the bug!!! I’m still working on my heavy hauler right now but it’s to far along to qualify for this...
DRIPTROIT 71 Posted January 11, 2019 Author Posted January 11, 2019 2 minutes ago, DrKerry said: Ok! See what I can stir up! Getting the bug!!! I’m still working on my heavy hauler right now but it’s to far along to qualify for this... Come on and join Kerry, you know that you want to!
DRIPTROIT 71 Posted January 11, 2019 Author Posted January 11, 2019 Okay everyone, so far we have 14 entries. Thanks to everyone who have entered so far. Don't forget, the contest doesn't start until Feb 1, so no actual building until then. Make sure to have a thread started by then though. I've spoke with Dave at A.I.T.M. and we will have a $25 credit with him for the winner of this contest! I'm looking forward to some great builds!! Brian
gotnitro? Posted January 11, 2019 Posted January 11, 2019 Wow looks like a good turnout for this years BRBO !! Very nice of Dave Natale to offer a prize for the winner too ! Really hoping to have my pneumatic dry bulk trailer finished by the time we kick this off..the Mack is tasked w hauling it !
DrKerry Posted January 12, 2019 Posted January 12, 2019 7 hours ago, DRIPTROIT 71 said: Come on and join Kerry, you know that you want to! I do but not sure I’ll get one done! In process of moving and not sure how long til I get back to the bench!
DRIPTROIT 71 Posted January 12, 2019 Author Posted January 12, 2019 54 minutes ago, DrKerry said: I do but not sure I’ll get one done! In process of moving and not sure how long til I get back to the bench! You never know unless you try. There's nothing to lose.
Rusty92 Posted January 12, 2019 Posted January 12, 2019 I’m in! 1926 Mack. I’ve got a soft spot for chain driven vehicles Macks!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now