RichCostello Posted July 11, 2019 Share Posted July 11, 2019 2 hours ago, StevenGuthmiller said: Good question. As far as I know, I have had no issues with photos in any other thread, or any other forum for that matter, and all of my photos come from the same place. From my digital camera to my hard drive, to my Fotki page, to you. Maybe this would be a good puzzle for the moderators to tackle. It sounds to me like a likely forum issue rather than something with Fotki. How about it guys? Steve I don't know what happened, but all of the pictures are showing up now. IT'S A MIRACLE!!! By the way, that Fury is looking GOOD! Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted July 11, 2019 Author Share Posted July 11, 2019 48 minutes ago, RichCostello said: I don't know what happened, but all of the pictures are showing up now. IT'S A MIRACLE!!! By the way, that Fury is looking GOOD! Terrific! I wonder if there was an issue with either Fotki or the forum over the past couple of days. As I said, I had a couple of issues posting photos a couple of days ago in other threads. Hopefully it is taken care of now. Steve Quote Link to comment Share on other sites More sharing options...
Brutalform Posted July 13, 2019 Share Posted July 13, 2019 (edited) Still not showing up. The last one I can view is the door panels with the flocking added. Maybe they’ll pop up soon. Edited July 13, 2019 by Brutalform Quote Link to comment Share on other sites More sharing options...
RichCostello Posted July 13, 2019 Share Posted July 13, 2019 2 hours ago, Brutalform said: Still not showing up. The last one I can view is the door panels with the flocking added. Maybe they’ll pop up soon. They come and go for me. One day they're all showing, the next time I look, half of them are gone. Quote Link to comment Share on other sites More sharing options...
RichCostello Posted July 13, 2019 Share Posted July 13, 2019 2 hours ago, Brutalform said: Still not showing up. The last one I can view is the door panels with the flocking added. Maybe they’ll pop up soon. I just went back and checked and those are the last ones that I can see too. Quote Link to comment Share on other sites More sharing options...
Bucky Posted July 13, 2019 Share Posted July 13, 2019 I'm having the same "come-and-go" problem. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted July 20, 2019 Author Share Posted July 20, 2019 On 7/13/2019 at 1:44 AM, Bucky said: I'm having the same "come-and-go" problem. I was on vacation this week and logged onto the forum a couple of times on my wife's I-Pad. I saw the same issue with some of the pics not showing up. I never have any issues with viewing anything on my old fashioned, trusty desk top! I suppose I'll have to see if I can figure out why this is happening and try to correct it. No promises. I'm not exactly a wizard when it comes to tech! Steve Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted August 7, 2019 Author Share Posted August 7, 2019 I decided to make one small change to the body. Whoever can pick it out wins a cookie! Steve Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted August 7, 2019 Share Posted August 7, 2019 I saw the same problem with Fotki photos last night on the Spotlight Hobbies board. So I'd say it's a Fotki issue. They have many servers and occasionally one gives a hiccup. Great work so far Steve, now Quote Link to comment Share on other sites More sharing options...
Can-Con Posted August 8, 2019 Share Posted August 8, 2019 6 hours ago, StevenGuthmiller said: I decided to make one small change to the body. Whoever can pick it out wins a cookie! Steve You took the black out of the side trim. Quote Link to comment Share on other sites More sharing options...
Can-Con Posted August 8, 2019 Share Posted August 8, 2019 BTW, it's looking incredible. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted August 8, 2019 Author Share Posted August 8, 2019 3 hours ago, Can-Con said: You took the black out of the side trim. Would you prefer chocolate chip, or peanut butter. Yeah, I just wasn't happy with how the black was working out, and I originally was going to do it in a dark gray anyway, so when I decided to do it over, I decided to paint it with a metallic steel color instead. Steve Quote Link to comment Share on other sites More sharing options...
moparfarmer Posted August 8, 2019 Share Posted August 8, 2019 Very nice job, but on the real deal it is black.. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted August 8, 2019 Author Share Posted August 8, 2019 (edited) 54 minutes ago, moparfarmer said: Very nice job, but on the real deal it is black.. I'm not 100% certain what is completely correct Wayne, and I don't want to be contradictory, but in my research I actually saw a lot more pictures of '65 Furys where they were a silver or gray color rather than black. That was actually my reasoning for wanting to do them gray. Steve It appears that some actually had turned aluminum panels between the moldings. Actually, I have seen a lot of variation in these moldings. Everything from the aluminum, black and gray, to other colors such as blue or white. Not sure if these are all factory installed or not. Edited August 8, 2019 by StevenGuthmiller Quote Link to comment Share on other sites More sharing options...
dino246gt Posted August 8, 2019 Share Posted August 8, 2019 Steve, it looks great in grey, as your models are always so nicely detailed, this is another winner! Love the rims and stance too, that's not factory stock, what's happening? LOL Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted August 8, 2019 Share Posted August 8, 2019 Im not 100% sure but I think they were avail in White. Blue. Black and a machine turned look . Need parts book to confirm..which i no longer have Quote Link to comment Share on other sites More sharing options...
ewetwo Posted August 8, 2019 Share Posted August 8, 2019 looking beautiful. Quote Link to comment Share on other sites More sharing options...
77-830 Posted August 8, 2019 Share Posted August 8, 2019 On the body side mouldings, Sport Fury's have an engine turned insert while Fury III's were "colored;" usually red, white or black depending on interior trim (possibly blue also, I don't recall and would have to pull out the parts book to confirm). The three bar mouldings on the front fender were Red/White/Blue on Sport's while they were the same color as the side moulding on III's. On the trunk finish panel, the Sport Fury's have engine turned inserts above and below the center strip with the PLYMOUTH lettering. On III's the whole panel is plain anodized aluminum. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted August 8, 2019 Author Share Posted August 8, 2019 18 minutes ago, 77-830 said: On the body side mouldings, Sport Fury's have an engine turned insert while Fury III's were "colored;" usually red, white or black depending on interior trim (possibly blue also, I don't recall and would have to pull out the parts book to confirm). The three bar mouldings on the front fender were Red/White/Blue on Sport's while they were the same color as the side moulding on III's. On the trunk finish panel, the Sport Fury's have engine turned inserts above and below the center strip with the PLYMOUTH lettering. On III's the whole panel is plain anodized aluminum. Useful information Mike. I guess that I really don't need to worry too much about 100% accuracy. The Johan kit was never accurate anyway. The body is a Fury III, while the interior depicts a Sport Fury, so I guess anything goes. There's really no way to replicate the engine turned detail anyway, so I guess the steel gray is as good as anything. Steve Quote Link to comment Share on other sites More sharing options...
br67 Posted August 10, 2019 Share Posted August 10, 2019 Car looks great from that rear angle Steve Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted August 10, 2019 Author Share Posted August 10, 2019 Finished up the interior today. The chassis is done and the body is finished except for a few minor details, so I guess I have exhausted my excuses for not starting on the engine! Steve Quote Link to comment Share on other sites More sharing options...
Bucky Posted August 10, 2019 Share Posted August 10, 2019 WOW!!! Please display this in an "exploded" view, so that we can soak up ALL the great detail that's gone into this fantastic build!! This interior is a scale model in its own right! Quote Link to comment Share on other sites More sharing options...
kelson Posted August 10, 2019 Share Posted August 10, 2019 Fantastic work on the interior,it's to bad builds like these never end up in the model magazines,these old kits in the right hands can turn out beautiful!! Quote Link to comment Share on other sites More sharing options...
STYRENE-SURFER Posted August 10, 2019 Share Posted August 10, 2019 Steven, that interior is fantastic! Thanks for the insight on how you created this beautiful build up. You've got way more skills than me Where's Hawley, used to live in Excelsior MN. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted August 11, 2019 Author Share Posted August 11, 2019 (edited) 2 hours ago, STYRENE-SURFER said: Steven, that interior is fantastic! Thanks for the insight on how you created this beautiful build up. You've got way more skills than me Where's Hawley, used to live in Excelsior MN. Thanks Kurt! Hawley is in west central Minnesota about 22 miles straight east of Fargo North Dakota on highway 10. Basically half way between Fargo/Moorhead and Detroit Lakes. Just a quiet little town of a little over 2.000 people. Steve Edited August 11, 2019 by StevenGuthmiller Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.