Display case ideas - for built ins or wall mounted

[gtx6970]

Ok,

With us being in the  new place. My old 5 ft tall cases are not going to work, as I simply do not have the floor space for them  any longer

 

I have an area above the family room ( I'll call it a ledge so to speak ) I was thinking either build glass shelving with glass front or buy some nice wall mounted cases.

The area I have avail is approx 4.5" tall and maybe 20' in overall length.

I'm thinking something like this as an example. Not cheap by any means . But I think these would work perfectly . And it doesn't have to be lighted. But I'm not against it either

Based on this size , I need 2 ,,,maybe even 3 of these

https://www.displays2go.com/P-33996/LED-Wall-Showcase-Locking-Doors

 

Edited July 14, 2019 by gtx6970

[1930fordpickup]

Bill that is a nice case. I like the fact that it locks also. 

 

[Brizio]

Very nice display! Unfortunately is not sealed, so you need to clen your models after a while.

[BigTallDad]

1 hour ago, gtx6970 said:

The area I have avail is approx 4.5" tall and maybe 20' in overall length.

 

That case is 39" tall...did you intend to say you have approx 4.5 feet (instead of inches)? The case also weighs over 100 pounds...will your ledge handle that?

[gtx6970]

1 minute ago, BigTallDad said:

That case is 39" tall...did you intend to say you have approx 4.5 feet (instead of inches)? The case also weighs over 100 pounds...will your ledge handle that?

Yes, the area I have avail is right at 4+1/2' feet tall.

Ive been up on said ledge painting it so I'm confident it will handle the weight no problem

[gtx6970]

The ledge in question.

Locking it is of no concern to me

A- its 7 ft above the floor

B- no one will ever open it  except me

[Dave Ambrose]

I wonder how well you'll actually see the cars in that location. I know my eyesight isn't the greatest, but for me, the cars would be there, but not very viewable. 

[gtx6970]

6 hours ago, Dave Ambrose said:

I wonder how well you'll actually see the cars in that location. I know my eyesight isn't the greatest, but for me, the cars would be there, but not very viewable. 

Believe me. Ive given that some thought.

But until we become empty nesters.  Im out of other ideas.

The cases im interested in are lighted. Plus  I can run some auxiliary lighting there as well if needed. 

 

Im not so much concerned with seeing them up close. But more so get them out of boxes and displayed the best i can . At least for maybe a couple more years untill my girls leave home. After that one of the spare bedrooms will become office/ car room.

Edited July 17, 2019 by gtx6970

[Jantrix]

On 7/14/2019 at 11:39 AM, gtx6970 said:

Ok,

With us being in the  new place. My old 5 ft tall cases are not going to work, as I simply do not have the floor space for them  any longer

 

I have an area above the family room ( I'll call it a ledge so to speak ) I was thinking either build glass shelving with glass front or buy some nice wall mounted cases.

The area I have avail is approx 4.5" tall and maybe 20' in overall length.

I'm thinking something like this as an example. Not cheap by any means . But I think these would work perfectly . And it doesn't have to be lighted. But I'm not against it either

Based on this size , I need 2 ,,,maybe even 3 of these

https://www.displays2go.com/P-33996/LED-Wall-Showcase-Locking-Doors

 

Hmm. 3ftx3ft, five shelves. That will hold about 20 models. So $378 divided by 20 equals $18.90 per model. Plus the higher you go, the less you can see the models.

Here's my recommendation. https://www.containerstore.com/s/race-car-display-cube/d?q=display cases&productId=10001594

Nine dollars each with free shipping for orders $49 dollars or more. These cases are awesome, the two halves fit perfectly and look seamless when joined. Very clear 360 and smooth. Stack perfectly. 10-1/4" wide x 5" deep x 4" high. You could line the shelf with these stacked two high. I have about ten of these and I love them. I'd be happy to take some photos if you'd like.

 

[Theo]

If you have an Ikea within driving distance, this is a nice affordable option (although not totally sealed).  I have a couple of them and can fit about 5 cars easily on each shelf.  With some acrylic risers can get up to 9-10 per shelf.

https://www.ikea.com/us/en/catalog/products/80269122/#/10119206

[Dave Ambrose]

On 7/17/2019 at 8:50 AM, Theo said:

If you have an Ikea within driving distance, this is a nice affordable option (although not totally sealed).  I have a couple of them and can fit about 5 cars easily on each shelf.  With some acrylic risers can get up to 9-10 per shelf.

https://www.ikea.com/us/en/catalog/products/80269122/#/10119206

My son has one of these for his Gundams and anime figures. It’s very nice, especially for the money. 

[Plowboy]

I have the display cases from Carney Plastics. They'll hold 21 models. I have them mounted to the wall in my garage. 

[gtx6970]

On 7/19/2019 at 5:23 AM, Plowboy said:

I have the display cases from Carney Plastics. They'll hold 21 models. I have them mounted to the wall in my garage. 

Those look like a very nice option. Thanks for that.

 

http://www.carneyplastics.com/home

Edited July 21, 2019 by gtx6970

[robertw]

Built a new display case in a room over a year ago, 12 feet long and 8 feet tall. Wood panels on each end glass shelves every 5 to 7 inches with full length glass doors to keep the dust away. I've discover that the shelves above 6 feet you're basically looking at the bottom of the kits (obviously the taller you are the more you'll see). Each shelf is 16 inches deep and there is lots of light in the room. In the end the two top shelves have become usefull only for storage of kits that didn't turn out well or ones that I don't want people to see clearly. Also keep a small step stool in the room. for when it is needed. Did end up with a foot tall shelf on the bottom which I figured I could use for further shelves but it has ended up the most full with tall or larger models. From time to time I build more then just cars. Should have enough room now to hold everything I'll build during the rest of my life.

[Zen]

Would love to see a pic of this 12' case!

[gtx6970]

5 hours ago, Zen said:

Would love to see a pic of this 12' case!

me to

 

[OldNYJim]

On 17 July 2019 at 9:47 AM, Jantrix said:

Hmm. 3ftx3ft, five shelves. That will hold about 20 models. So $378 divided by 20 equals $18.90 per model. Plus the higher you go, the less you can see the models.

Here's my recommendation. https://www.containerstore.com/s/race-car-display-cube/d?q=display cases&productId=10001594

Nine dollars each with free shipping for orders $49 dollars or more. These cases are awesome, the two halves fit perfectly and look seamless when joined. Very clear 360 and smooth. Stack perfectly. 10-1/4" wide x 5" deep x 4" high. You could line the shelf with these stacked two high. I have about ten of these and I love them. I'd be happy to take some photos if you'd like.

 

I'd love to see some photos!  I have a Container Store near me, I had no idea they sold anything like this!

[robertw]

I would oblige if I could post a pic of the display case but the room isn't beig enough for me to back up and get a shot of it all in and secondly I've never set up an account with a photo hosting site.

[Modelbuilder Mark]

A large number of my completed models I too do not currently display, they are in stack-able Rubbermaid style containers, with foam partitioning that I take them to shows in. For those that are not in those, I keep in individual display cases. I used to buy the old AMT cases, but they simply got too expensive. The last few years, I have been picking these up from Hobby Lobby. If I am near there on a Saturday, and there is nothing else I need, I go ahead and use the weekly coupon to pick one up for the stash. To top that off, when they had their summer clearance a few weeks back, they had several for $2.49 so I stocked up. I even picked up some of the long skinny ones, as two or three small hot rods will fit in them. With these, I can "stack" them 4-5 high comfortably. There can also be bouht in bulk for about $5 each direct from the manufacturer here https://www.pioneerplastics.com/product-category/display-case/diecast/

Since I too have no real display area, I have a simple have a cheap bookcase, Like this $25 one from Target https://www.target.com/p/5-shelf-bookcase-room-essentials-153/-/A-54376271?preselect=54360637#lnk=sametab

that I use to stack the cases on. May not be a cool as a display cabinet, but as they are sealed, I never have to worry about dusting them, etc.

[Jantrix]

10 hours ago, CabDriver said:

I'd love to see some photos!  I have a Container Store near me, I had no idea they sold anything like this!

Very well. I'll try to take some photos this weekend. The Container Store sells similar cases for all sorts of collectibles.

[OldNYJim]

Thanks buddy!  I like those ones Mark posted above too!

[gtx6970]

Thanks all.

I think Im gonna order 3 or 4 of the Carney Cases

 

for the money I think they may be my best option.

[shoopdog]

I have three of Carney's cases, you won't be disappointed.

[gtx6970]

1 hour ago, shoopdog said:

I have three of Carney's cases, you won't be disappointed.

Your mirror back or clear back.

I cant decide which way to go.

 

[Plowboy]

I have three of the Carney cases and getting ready to buy a fourth. I like the mirror backs as it allows both sides to be viewed.

I recommend getting them without the dividers. Smaller models like compacts and '30s,  you can fit four to a shelf. The bigger '60's and 70s models like Impalas, Galaxies etc. take up more room. Three will fit OK. But the center section could get tight on some of them.

Edited July 27, 2019 by Plowboy