bogger44 Posted March 5, 2021 Share Posted March 5, 2021 Finished this up earlier this week. Box stock other than plug wires and a slightly raised suspension. Body is Tamiya TS-11 Maroon & TS-21 Gold. Interior is a mix of TS-75 Champagne Gold & Krylon Short Cuts Antique Bronze. The 30-plus year old decals were a real pain and wanted to curl badly, but with loads of Micro Sol they finally settled down for the most part. I then buried 'em in Model Master Ultra Gloss Clearcote to protect them. These are great kits, second one I've done and have 3 more to tackle. Thanks for looking and any comments or questions. 1 Quote Link to comment Share on other sites More sharing options...
cobraman Posted March 5, 2021 Share Posted March 5, 2021 Looks very good. Quote Link to comment Share on other sites More sharing options...
stinkybritches Posted March 5, 2021 Share Posted March 5, 2021 That is really nice and clean. Excellent work. Quote Link to comment Share on other sites More sharing options...
shoopdog Posted March 5, 2021 Share Posted March 5, 2021 Fantastic! You're right, these are great kits for sure and you nailed it! Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted March 6, 2021 Share Posted March 6, 2021 Wow, great work on that Tony? Quote Link to comment Share on other sites More sharing options...
afx Posted March 6, 2021 Share Posted March 6, 2021 Very nice. Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted March 6, 2021 Share Posted March 6, 2021 Looks great, well done! Quote Link to comment Share on other sites More sharing options...
Scott8950 Posted March 6, 2021 Share Posted March 6, 2021 That's a beautiful build! Very nice work Quote Link to comment Share on other sites More sharing options...
Kromolly Posted March 6, 2021 Share Posted March 6, 2021 Gorgeous job on that T-bolt. Fantastic work there! Quote Link to comment Share on other sites More sharing options...
majel Posted March 7, 2021 Share Posted March 7, 2021 Fantastic build, very nice paint job! Quote Link to comment Share on other sites More sharing options...
bogger44 Posted March 8, 2021 Author Share Posted March 8, 2021 Thanks guys! Quote Link to comment Share on other sites More sharing options...
mredjr Posted March 8, 2021 Share Posted March 8, 2021 Great job! Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted March 9, 2021 Share Posted March 9, 2021 Perfect build. One of the nicest all round T bolt builds I've seen. Quote Link to comment Share on other sites More sharing options...
bisc63 Posted March 9, 2021 Share Posted March 9, 2021 Very well done, and colors look spot-on! Quote Link to comment Share on other sites More sharing options...
Brutalform Posted March 9, 2021 Share Posted March 9, 2021 Very nice and clean build on your Thunderbolt!! I wish my decals came out as nice as yours did. They really are fun cars to build. I’ve built about 16 so far. Now that I’m totally out of decals, I’m pretty sure I’m finished with building them. Can’t wait to see your others when they are done. Quote Link to comment Share on other sites More sharing options...
slusher Posted March 9, 2021 Share Posted March 9, 2021 Beautifully done,Toney Quote Link to comment Share on other sites More sharing options...
ChrisR Posted March 9, 2021 Share Posted March 9, 2021 Looking great!! Quote Link to comment Share on other sites More sharing options...
Nitrobarry Posted March 9, 2021 Share Posted March 9, 2021 GREAT work! I`ve got both the Gas Ronda and the Bill Lawton kits. Got some inspiration now! Quote Link to comment Share on other sites More sharing options...
Brutalform Posted March 9, 2021 Share Posted March 9, 2021 Tony, btw... would you mind sharing how you raised the front suspension? The T Bolt front suspension is a bit touchy. Yours sits perfect. Quote Link to comment Share on other sites More sharing options...
bogger44 Posted March 11, 2021 Author Share Posted March 11, 2021 Thanks again everyone! On 3/9/2021 at 12:00 PM, Nitrobarry said: GREAT work! I`ve got both the Gas Ronda and the Bill Lawton kits. Got some inspiration now! Build 'em Barry, you'll enjoy them! The other one I've built is Ronda's too. On 3/9/2021 at 1:37 PM, Brutalform said: Tony, btw... would you mind sharing how you raised the front suspension? The T Bolt front suspension is a bit touchy. Yours sits perfect. No problem Tom. You are right the front suspension is a bit tedious and I'd say it's really the only relatively sore point in the kit. Well, the headers are a little tricky too, for me anyways. I probably should have worded raising the suspension a little differently, as the main assembly is left stock, I just trimmed off the mounting pins from the spindles and moved them down a bit lower. When reattaching them I pinned them on with a small chunk of metal rod for strength. Here's a couple pics to show how much I moved them down compared to the OOB setup on a beater chassis I have. On another note I did add some small blocks to the rear leaf spring mounts to pick up the back end a little, but they didn't add much height. I did this same process when I build Gas Ronda's car, too. I am pretty happy with how the decals turned out, but believe me there are a couple warts here and there lol. I know you've built the Bob Ford cars, do you remember where you got the decals from? I wouldn't mind adding one of those to my expanding fleet of 'bolts if they are still available. Quote Link to comment Share on other sites More sharing options...
Brutalform Posted March 11, 2021 Share Posted March 11, 2021 (edited) Thanks for the info. I was thinking about trying to raise the fronts in several of my builds, but decided not to because of the way the front end is designed. I have broken several of the tie rods on some of mine in the past, leaving me to either scrounge another, or try to fix the broken one. We both have pretty much the same idea on the way to get it done, though. About the decals.. I’m almost positive I had a set from Fred Cady lying around. I do remember that the decals for both cars are from one card. I even remember that I mistakenly used the wrong door decals on the wrong cars. The “INC” on the decals is slightly different for each car. I haven’t seen these anywhere in a while. Top End Decals (Jack Smith) does have the Ken Vogt set for $8. His decals are some of the best I’ve ever used. You might want to check with him. I have a price list of his if you would like to check it out? Edited March 11, 2021 by Brutalform Quote Link to comment Share on other sites More sharing options...
Brutalform Posted March 11, 2021 Share Posted March 11, 2021 I might even buy a set for myself, and rebuild the yellow car all over again. There are so many things on that build that I was not happy with, that I just might disassemble, and at the very least, re paint and re decal the body. That car was definitely a pain in the neck for some reason.....????.....??? Quote Link to comment Share on other sites More sharing options...
Dragline Posted March 11, 2021 Share Posted March 11, 2021 Just wanted you guys to know that Mr Healey's name is spelled wrong. It is Healey not Healy. Since he is a friend of mine and pointed it out when I was building one for him. Get two sets or a steady hand and add the "E". Quote Link to comment Share on other sites More sharing options...
bogger44 Posted March 11, 2021 Author Share Posted March 11, 2021 Thanks for the decal info Tom. Sorry about the troubles you had with the yellow car, hopefully if you do decide to re-do it the second go around will go better. I think the next one I'll probably build is the Hubert Platt car. Bob, thanks as well for the heads up on the spelling error of Healey. I didn't even realize that. Quote Link to comment Share on other sites More sharing options...
Dragline Posted March 11, 2021 Share Posted March 11, 2021 Many don't know that so it's not a biggie. It did aggravate him for a while at first when it was initially released. At this point in his life he could care less, but there was a time.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.