TransAmMike Posted November 5, 2021 Share Posted November 5, 2021 I have had very many cars over the years and tend to build replica's of them. Santa gave me this kit this past Christmas and now I am in the process of working on it. I seldom do WIP's because I find taking pics, editing and resizing them (which I'm also a WIP?) and posting them on the forum to be too laborious. I'm calling this an abbreviated WIP. I have become a fan of Stynylrez primer/Createx top coat/Rust Crystal Clear Acrylic fan....well sort of. The primer coats and black topcoat went on pretty much OK. After a few days I sprayed the Rusto clear and it almost immediately checked badly. No clue why because it's not the first time I have used this process. So, into the Purple Pond it went (first time I have ever done it). I was expecting better and faster results but after 4 days I finally managed to get all the paint off. I decided to get a bottle of Createx AutoBorne black sealer/primer at HL (clearance for some reason. $6.49 reduced to $1.64). Wow, what a smooth finish...way better than I ever got with The Stynylrez. The pics you will see of the body are after top coating with the Createx opaque air brush colors paint. The finish is pretty darn smooth and with clearing should come out slick. My issue now is what clear to use because I sure don't want to have a replay of the issue I had. The miniscule 4 cyl Turbocharged engine is really well detailed in this kit. The interior. The pics show it a bit orangy but it really is red The chassis/undercarriage Well thats it for now. I have an original bottle of Future I may use to clear the body tomorrow. Thanks for looking!!!! Quote Link to comment Share on other sites More sharing options...
Zippi Posted November 5, 2021 Share Posted November 5, 2021 Nice progress on the T'Bird buddy. That engine looks really kewl and detailed. You'll get the paint issue and clearing it worked out. You always do. Nice work so far. Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 5, 2021 Author Share Posted November 5, 2021 6 minutes ago, Zippi said: Nice progress on the T'Bird buddy. That engine looks really kewl and detailed. You'll get the paint issue and clearing it worked out. You always do. Nice work so far. Thanks a lot my Friend!! Quote Link to comment Share on other sites More sharing options...
FLHCAHZ Posted November 5, 2021 Share Posted November 5, 2021 Looking great Mike! Looking forward to more progress Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 5, 2021 Author Share Posted November 5, 2021 Well thanks Chaz...it's nothing special but should come out pretty nice. Quote Link to comment Share on other sites More sharing options...
Claude Thibodeau Posted November 5, 2021 Share Posted November 5, 2021 Hi Mike! Great build. This kit IS a very good and well detailed kit. Just the engine speaks volume. To your point about clear: lately, I've been experimenting with all sorts, and lo and behold, my new favorite is MR. Hobby (Japan) super clear. Lacquer based, marked smell, but flows and flashes very well. They have a second variety, called Top Coat, that I tried also, as a "flash coat" after 2 medium coats of the former, and it flashed very well, and was easy to buff to a mirror shine. More expensive than, say Tamya's, but you get your money's worth. Just my two cents, FWIW... Good luck! CT Quote Link to comment Share on other sites More sharing options...
Steve H Posted November 5, 2021 Share Posted November 5, 2021 Hi Mike, nice to see a WIP from you sir! You are off to a great start. This is my favourite T Bird body style, so I’ll be watching. I don’t have the experience, or skill of Claude, but I too had a great result with the Mr Hobby clear. That’s my 2 cents! Now you have 4 cents!! Cheers, Steve Quote Link to comment Share on other sites More sharing options...
4mula1fan Posted November 5, 2021 Share Posted November 5, 2021 Looking great! Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 5, 2021 Author Share Posted November 5, 2021 23 minutes ago, Claude Thibodeau said: Hi Mike! Great build. This kit IS a very good and well detailed kit. Just the engine speaks volume. To your point about clear: lately, I've been experimenting with all sorts, and lo and behold, my new favorite is MR. Hobby (Japan) super clear. Lacquer based, marked smell, but flows and flashes very well. They have a second variety, called Top Coat, that I tried also, as a "flash coat" after 2 medium coats of the former, and it flashed very well, and was easy to buff to a mirror shine. More expensive than, say Tamya's, but you get your money's worth. Just my two cents, FWIW... Good luck! CT 11 minutes ago, Steve H said: Hi Mike, nice to see a WIP from you sir! You are off to a great start. This is my favourite T Bird body style, so I’ll be watching. I don’t have the experience, or skill of Claude, but I too had a great result with the Mr Hobby clear. That’s my 2 cents! Now you have 4 cents!! Cheers, Steve Thanks Claude and Steve. I probably should think about it...just wonder how compatible it is with Createx. Quote Link to comment Share on other sites More sharing options...
slusher Posted November 5, 2021 Share Posted November 5, 2021 Mike, looking good buddy! I knew a guy who had two turbo birds. Love them. I will be following along.. Quote Link to comment Share on other sites More sharing options...
espo Posted November 5, 2021 Share Posted November 5, 2021 Sorry to hear about your paint issues but it sounds like you have that under control now. The Black exterior with the Red Interior will look sharp. Was that the color combination of your T-Bird ? Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 5, 2021 Author Share Posted November 5, 2021 4 hours ago, espo said: Sorry to hear about your paint issues but it sounds like you have that under control now. The Black exterior with the Red Interior will look sharp. Was that the color combination of your T-Bird ? Thanks David and yes, it is what mine was. It was a really cool, fun and comphy drive especially with the 5-speed. Also you could vary the ride firmness. Really an great little car. Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 5, 2021 Author Share Posted November 5, 2021 10 hours ago, slusher said: Mike, looking good buddy! I knew a guy who had two turbo birds. Love them. I will be following along.. Thanks my Tennessee neighbor. Yep, it was definately an enjoyable car. Quote Link to comment Share on other sites More sharing options...
JollySipper Posted November 5, 2021 Share Posted November 5, 2021 Mike, this looks really good! When I built mine, the only problem I had was the headlights....... DupliColor makes a clear they call "1K clear". It's in a large can...... It's kinda 'hot' but shines really nice. May be worth trying on something scrap..... Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 5, 2021 Author Share Posted November 5, 2021 4 hours ago, JollySipper said: Mike, this looks really good! When I built mine, the only problem I had was the headlights....... DupliColor makes a clear they call "1K clear". It's in a large can...... It's kinda 'hot' but shines really nice. May be worth trying on something scrap..... How did you do the red stripe around the whole car TJ? I have 1/8 inch vinyl tape thats just a bit too wide for my likeing. I think I can cut it thinner to work tho. Quote Link to comment Share on other sites More sharing options...
JollySipper Posted November 5, 2021 Share Posted November 5, 2021 2 hours ago, TransAmMike said: How did you do the red stripe around the whole car TJ? I didn't! I just painted all the trim with black after masking it all with foil....... Your tape idea sounds like a good idea, you could possibly lay it on a piece of glass and cut it in half with a straight edge..... Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 5, 2021 Author Share Posted November 5, 2021 Got the original Future on the body. Definately shiny and no orange peel but will need to be polished. Anyone know how long I should wait until I do the polishing compound and polish??? Quote Link to comment Share on other sites More sharing options...
cobraman Posted November 6, 2021 Share Posted November 6, 2021 Looks like you have a pretty good shine. Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 6, 2021 Author Share Posted November 6, 2021 9 minutes ago, cobraman said: Looks like you have a pretty good shine. Thanks Ray. It does have a nice gloss. First use of the Future in a very long time. Quote Link to comment Share on other sites More sharing options...
Bainford Posted November 6, 2021 Share Posted November 6, 2021 That’s going to be a good looking T-Bird. Nice looking paint. Quote Link to comment Share on other sites More sharing options...
slusher Posted November 6, 2021 Share Posted November 6, 2021 Beautiful shine and finish.. Quote Link to comment Share on other sites More sharing options...
ZTony8 Posted November 6, 2021 Share Posted November 6, 2021 16 hours ago, TransAmMike said: Thanks Ray. It does have a nice gloss. First use of the Future in a very long time. I've never known a need to polish Future. It's self leveling. Maybe polish the color coat next time, then apply Future? Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 6, 2021 Author Share Posted November 6, 2021 1 hour ago, ZTony8 said: I've never known a need to polish Future. It's self leveling. Maybe polish the color coat next time, then apply Future? Oh its nice and level Tony. Just a few spots with tiny trash or bubble spots. No polishing on the acrylic color coat. Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 6, 2021 Author Share Posted November 6, 2021 17 hours ago, Bainford said: That’s going to be a good looking T-Bird. Nice looking paint. Thank you Trevor, I'm pretty darn happy with the result. Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 6, 2021 Author Share Posted November 6, 2021 4 hours ago, slusher said: Beautiful shine and finish.. Thank you neighbor. Gotta get the darn red stripe all the way around the body now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.