Jump to content
Model Cars Magazine Forum

1/12 Tamiya Caterham Super Seven


jaymcminn

Recommended Posts

This is the 1/12 scale Caterham BDR by Tamiya. I've had my eye on this kit since it came out back in the 90s and got a great deal on a sealed kit on eBay a month or so ago. It is an unusual kit for Tamiya and they've never made anything else quite like it. 

This kit was apparently a passion project for the Tamiya engineers. They wanted to create something that was as close as possible to the experience of building a 1:1 Caterham (appropriate as the Super Seven is available as a kit), so it goes together much the same way as the real thing. Real aluminum panels are screwed to the tube frame. The working suspension is then assembled to the tub, at which point the interior and engine are fitted. It's an impressive kit, beautifully engineered and impressively packaged.

I decided to create a bit of an homage to the Lotus 7 from "The Prisoner" while still showing some of the bare aluminum panels. I decided to paint the aluminum hood and cowl as well as the fenders and nose cone in Splash Paints Bentley Racing Green Metallic. Rather than painting the whole nose cone yellow as the Prisoner car was, I went with a thin yellow stripe in Tamiya Camel Yellow. The painted parts after clear and polishing...

PXL_20230405_131318900.thumb.jpg.064c7116edd5fe003405b8bf113f1bd1.jpg

Next I started on the complex front and rear suspension. The working shocks are pretty much standard Tamiya fare. The suspension arms are cast metal for additional strength. Everything goes together with tiny screws/bolts. The screwdriver Tamiya provides is excellent compared with most screwdrivers you get in a model kit, and I stuck a small neodymium magnet to it to magnetize it so it will hold the screws in place. The front suspension was incredibly fiddly as a lot of the mounting points are inside the tub and would be a bit of a challenge to get to on the 1:1! 

Bare frame...

PXL_20230406_135951725.thumb.jpg.5f344323b4f6219ce5fba1c05488a4dd.jpg

Front suspension in situ...

 

PXL_20230415_121546748.jpg.5c1e69aa8ea7123bf49447541a22400c.jpg

The rear suspension is just as complex as the front but easier to mount up. The paint on the brake discs is Vallejo Metal Air Chrome. As chrome paint it's not great but it's excellent for a polished/shiny metal surface.

PXL_20230415_174854331.jpg.e1eb832a0d953d2761820593dd17fd87.jpg

PXL_20230415_212524201.thumb.jpg.3742aad6e55f7c0dbc0c22fef3840ad6.jpg

Next up is the rollbar, which is chromed metal. The metal boot floor goes in now as well. These shots also give a sneak peek of the Dull Red interior color, which really pops against the green.

PXL_20230415_212449612.thumb.jpg.5810a0da4f672818e174e7591e2a9095.jpgPXL_20230415_212427978.jpg.66c7a98f07d1f10d9795c770a137736f.jpg

That's where we stand now... more updates soon!

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...