1959scudetto Posted November 5, 2023 Share Posted November 5, 2023 (edited) Ferrari 250 GTO wheels from Jack Modeling: Jason created these with input from Pierre Rivard, Peteski and myself - these are meant to replace the wheels of the Italeri/Revell, Fujimi, Protar/Revell and Gunze Sangyo/Airfix kits. If he gets enough response , he will offer them for sale to the public. I bought 3 sets from him – each wheel consists of 3 parts: Borrani spoke rim, Dunlop racing tire with period-correct tread and sidewall lettering and the central hub/spinner. Below, you can see the sets spraypainted (directly onto the grey resin without any preparation) LEFT: Borranis : Duplicolor rim silver Dunlop tires : Duplicolor rallye black (semi-gloss) Spinners : Revell Chrome CENTER: Borranis : Revell Chrome Dunlop tires : Tamiya rubber black Spinners : Revell Chrome RIGHT: Borranis : Revell Chrome – with 2 shots Tamiya clear smoke overspray Dunlop tires: Tamiya rubber black Spinners : Humbrol Chrome silver enamel DIMENSIONS: standard for the early 250 GTO were: front 6.00 L-15, rear 7.00 L-15 Model tires: 28mm front and 29mm rear Model rims 17mm, width 8mm front, 10mm rear This is how they look on the model - Highly recommended : If you are interested in those wheels, please contact Jason directly : Here is his e-mail-address: contact.jackmodelling@gmail.com Edited November 6, 2023 by 1959scudetto 3 Quote Link to comment Share on other sites More sharing options...
Pierre Rivard Posted November 6, 2023 Share Posted November 6, 2023 I second Helmut's review. These look fantastic and are very easy to paint. I have 5 sets and starting work on my first Ferrari with these. At least as good as PE replacements quite reasonably priced. I highly recommend them. Quote Link to comment Share on other sites More sharing options...
1959scudetto Posted November 6, 2023 Author Share Posted November 6, 2023 5 hours ago, Pierre Rivard said: I second Helmut's review. These look fantastic and are very easy to paint. I have 5 sets and starting work on my first Ferrari with these. At least as good as PE replacements quite reasonably priced. I highly recommend them. I'm going to order some more sets (not only for the GTO's, but also for my transkits: Breadvan, 330 LMB/GTO and GTO prototype)... Quote Link to comment Share on other sites More sharing options...
Hoffman Posted November 6, 2023 Share Posted November 6, 2023 Beautiful! Must have.....Thank you, Helmut! 1 Quote Link to comment Share on other sites More sharing options...
Exotics_Builder Posted November 7, 2023 Share Posted November 7, 2023 (edited) Definitely a must get. I have his wheels for the Ferrari 275 GTB and they are very nice and fit well. Edited November 7, 2023 by Exotics_Builder Quote Link to comment Share on other sites More sharing options...
1959scudetto Posted November 20, 2023 Author Share Posted November 20, 2023 Jason offers these wheels and tires now also in his ebay-shop: https://www.ebay.de/str/jackmodelling?_trksid=p4429486.m3561.l2563 Highly recommended ! Quote Link to comment Share on other sites More sharing options...
Justin Porter Posted November 21, 2023 Share Posted November 21, 2023 Just received two sets from Jason. One for my California and one ear-marked for my Fujimi 250GTO build. They 100% live up to expectations. Positively gorgeous wheels and tires. 1 Quote Link to comment Share on other sites More sharing options...
KurtJ Posted November 22, 2023 Share Posted November 22, 2023 Does the tire set have the different width for front and rear tires or are they all one width? Quote Link to comment Share on other sites More sharing options...
peteski Posted November 23, 2023 Share Posted November 23, 2023 Mine came as small and large pair, but I think you can ask Jason to sell you 4 of the same size if that is what you need. Here are some photos Jason posted in a PM (I hope he doesn't mind). Quote Link to comment Share on other sites More sharing options...
KurtJ Posted November 23, 2023 Share Posted November 23, 2023 Thanks for your response. I had a difficult time with Google translate and couldn’t be sure. I thought it would be that way, but wasn’t sure. I had emailed Jason, but haven’t heard back yet. Thanks again. Kurt Quote Link to comment Share on other sites More sharing options...
peteski Posted November 23, 2023 Share Posted November 23, 2023 (edited) 1 hour ago, KurtJ said: Thanks for your response. I had a difficult time with Google translate and couldn’t be sure. I thought it would be that way, but wasn’t sure. I had emailed Jason, but haven’t heard back yet. Thanks again. Kurt Assuming that you want Englis traanslation (the user's location is no longer shown in their profile), Jason's listings are also available on American eBay. https://www.ebay.com/str/jackmodelling Edit: just realized what you mean - the descriptions are in French. I looked at one of the Ferrari wheel listings and it seems that some negative reviews were posted for Jason. Strange as I haven't had problems with him. Edited November 23, 2023 by peteski Quote Link to comment Share on other sites More sharing options...
1959scudetto Posted November 23, 2023 Author Share Posted November 23, 2023 12 hours ago, KurtJ said: Does the tire set have the different width for front and rear tires or are they all one width? Kurt, just scroll up to the start of this topic - I have mentioned the dimensions inner and outer diameter and width of the tires . Quote Link to comment Share on other sites More sharing options...
KurtJ Posted November 23, 2023 Share Posted November 23, 2023 I have heard from Jason and things should be fine. I hadn't noticed in the pictures until just now the that the 7 by 15 and 6 x 15 markings are visible on the sidewalls. Duh! Amazing stuff. When I was a kid we only had rocks to play with, they hadn't even invented dirt yet. 1 Quote Link to comment Share on other sites More sharing options...
Pierre Rivard Posted November 23, 2023 Share Posted November 23, 2023 Just finished painting my first set for a current 250 gto project. Picture is worth a thousand words. Quote Link to comment Share on other sites More sharing options...
KurtJ Posted November 24, 2023 Share Posted November 24, 2023 Nice !! Quote Link to comment Share on other sites More sharing options...
BobbyG Posted November 29, 2023 Share Posted November 29, 2023 On 11/23/2023 at 4:40 PM, Pierre Rivard said: Just finished painting my first set for a current 250 gto project. Picture is worth a thousand words. Pierre: Beautiful, the most realistic and very accurate. Pleaes help, I want to order the set from Jason but having a hard time figuring out the wheel sizes. Can you tell me want size wheels to order for the Fujimi Ferrari? Thanks and your response is greatly appreciated. Quote Link to comment Share on other sites More sharing options...
BVC500 Posted November 29, 2023 Share Posted November 29, 2023 40 minutes ago, BobbyG said: Pierre: Beautiful, the most realistic and very accurate. Pleaes help, I want to order the set from Jason but having a hard time figuring out the wheel sizes. Can you tell me want size wheels to order for the Fujimi Ferrari? Thanks and your response is greatly appreciated. Ditto! Quote Link to comment Share on other sites More sharing options...
Pierre Rivard Posted November 29, 2023 Share Posted November 29, 2023 Hi fellows, go for the 1,7 cm diameter which are designed to replicate a 15 inch wheel at 1/24. The Dunlop racing tires are a match to the 17mm wheels. I'll be posting a Ferrari GTO build with these tomorrow morning in the "other racing" category. Should provide with more pictures of these wheels. Quote Link to comment Share on other sites More sharing options...
jaymcminn Posted December 4, 2023 Share Posted December 4, 2023 Just received 3 sets of these. The detail is staggering, so much better than any photo etched wheel could manage. I'd love to see a slightly deeper set with Michelin XWX tires for Ferrari 275s and 365 Daytonas! 1 Quote Link to comment Share on other sites More sharing options...
peteski Posted December 7, 2023 Share Posted December 7, 2023 On 12/4/2023 at 6:48 PM, jaymcminn said: Just received 3 sets of these. The detail is staggering, so much better than any photo etched wheel could manage. I'd love to see a slightly deeper set with Michelin XWX tires for Ferrari 275s and 365 Daytonas! Jason, contact Jason at Jack Modeling, He accepts requests (these wheels and tires started as a request on this forum). Since he already has a CAD design for the 250GTO wheels, it should be easy to change the rim depth or other dimensions. The tires will be a bit more involved, but doable. Quote Link to comment Share on other sites More sharing options...
250 Testa Rossa Posted March 9 Share Posted March 9 Need to get in touch with Jason. Is there a way I can do so? Thanks Quote Link to comment Share on other sites More sharing options...
1959scudetto Posted March 10 Author Share Posted March 10 22 hours ago, 250 Testa Rossa said: Need to get in touch with Jason. Is there a way I can do so? Thanks Here is his e-mail-address: contact.jackmodelling@gmail.com Quote Link to comment Share on other sites More sharing options...
Pierre Rivard Posted April 19 Share Posted April 19 First set of out laced Borrani style wheels printed by Jason. I expect these will be added to his store in a near future. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.