spad007 Posted April 7, 2011 Posted April 7, 2011 (edited) A test fitting of the Cord COE with some cut up parts from two kits. A saw is the best thing to happen to the Lindberg kit.>warning flammable . It looks like a bunch of work but i hope to find a happy medium between my drawing and what i can build. i found some brass tube 3/32 X 3/16 (K&S #262) so i can stretch the frame as needed. A front wheel drive COE ha ha! The finely molded Cord engine is mostly there for an idea of what i am dealing with. Ha Ha! . "What A piece of Poop," Slapping forehead," Gee's I could had a V-8!" i think i might have a SBC i can shoe horn in and put the radiator in back,, fan facing the rear.."OR not." Col.Jack SG-1 Edited June 9, 2011 by spad007
LDO Posted April 7, 2011 Posted April 7, 2011 (edited) What pickup cab are you using? BTW why not a supercharged Duesenberg straight-8 under the cab? Auburn/Cord/Duesenberg were all under the same roof (more or less. Art Anderson could certainly give you more information). That Duesenberg made 320hp on the street in 1932. A factory hot rod made 400hp. IMHO, a good engine for pulling all that truck with a car on the back. Edited April 7, 2011 by LDO
spad007 Posted April 8, 2011 Author Posted April 8, 2011 LDO its a 37/8 ford pee cup .As crappy as the cord engine is in this model kit . The whole top of it is a super charger. .The idea behind changing the engine is clearance so i don't have to make a great big dog house, in the cab. maybe a corvair engine like the 810 cord replica. 8/tenths CORD .This is not a grownup type model yet besides i don't have any of those alliterative engines. And i need to build some thing to hold in my hand before i make a classic style with the fenders i drew. i think i might still go for the closed wheel in back on this test model. Bill Edman; YES! Me too. Here are some more shots.
Longbox55 Posted April 8, 2011 Posted April 8, 2011 A front wheel drive COE ha ha! Actually, there was a FWD COE type truck built by GMC in the '70s. The GMC MotorHome used a Tornado based driveline.
Chuck Most Posted April 8, 2011 Posted April 8, 2011 The old Monogram Cord had way better engine detail, but the Linberg kit is easier to find, and way cheaper (for many reasons). Can't wait to see this one come to life!
spad007 Posted April 14, 2011 Author Posted April 14, 2011 Some Engine Shots yes i know its backward but even a SBC will run backward in this FWD COE. i will have fun trying to run exhaust pipes for this i might run some cab stacks if i can make them . funny thing as i plan the cab no one will see the power plant. maybe a clear dog house? i might do the rocker covers in blue anodized like a Morroso cover. a concept car.
Jocache83 Posted April 14, 2011 Posted April 14, 2011 Looking good, can't wait for the finish product. ive always wanted to build one of these
spad007 Posted April 23, 2011 Author Posted April 23, 2011 Ok i started the putty and sand putty and sand part of build and i narrowed the seat & floorboard and cut up the dash from both kits i kind of have to lay it out to see for my self how i am doing. so i took some shots too to show here.... man this is a bunch of work.
maltsr Posted April 23, 2011 Posted April 23, 2011 COE's aren't my cup of tea, but this one has my attention . ( I have had the misfortune to buy and build the Lindberg Cord). Keep it up!!
spad007 Posted April 23, 2011 Author Posted April 23, 2011 COE's aren't my cup of tea, but this one has my attention . ( I have had the misfortune to buy and build the Lindberg Cord). Keep it up!! Thank you Mate. One man that built the Lindberg cord kit ..Did you do any thing with the head light doors? They stick out and they need to be flush one of many problems with this kit.. i am not happy with any thing to do with this Pyro kit. so no loss cutting it up.
Boreham Posted April 23, 2011 Posted April 23, 2011 Interesting build Mike... look forward to watchin this WIP
spad007 Posted May 29, 2011 Author Posted May 29, 2011 (edited) Update: Some more shots as the project drags on and on .Sorry about the Bump I think that the Photo's kind of explain where i am going.but maybe not. I am mocking up as I go, so sanding(I needed a break from sanding) and painting waits for a look at what the whole will look like. Besides if i work out how i will build this i don't have to choose a Color yet. ( Tamiya TS-19 Metallic Blue) i think with lots of clear over. i am thinking of making cab stacks with heat shield from expanded metal screen .(Brass) I plan that the Cord hauler will haul a midget racer still to be built. as the cab is very narrow . *To keep inside front fenders) Wheel base is 7 inches (175mm) rear track about 2 1/2 inches (65mm) front track About 2 3/8 inches ( 60mm) Edited June 1, 2011 by spad007
slantasaurus Posted June 1, 2011 Posted June 1, 2011 Looks like its really starting to come together now. I can't wait to see it with the Midget pearched on the back.
crazyjim Posted June 1, 2011 Posted June 1, 2011 Somehow I missed the start of this build. Now that I found it, I'll keep watching.
MikeMc Posted June 1, 2011 Posted June 1, 2011 Totally kool and original!! A great idea for a lindburg kit Well call me odd....But COEs are the rage in custom truckin now. I was inspired to do a 50 Ford COE....I love the hood you made...more pix? The idea of reversing the motor is excellent...only different would be a quick change up there for me......but as the body would hide it...no big deal!!! heres a shot of what got me going....and where I'm at
spad007 Posted June 1, 2011 Author Posted June 1, 2011 Stach? do you mean pictures of the fifty COE or more of the Cord. if you mean the fifty Ford I can but do i want to put them in this thread? the Fifty is on hold for now to almost finish the Cord as i want to make my mistakes on it ( a learning experience for sure) i am making it up as i go.. if i open the hood on the Fifty i will scribe/cut it open and tilt it forward on one big hinge i think but for now it's a closed deal.. man it's a lot of sanding i need a small scale DA and shuffle board. i might chop the top a bit on it i don't know.(the 50 that is).. and i have not decided what type the bed might be.. i like where your going with yours. keep on trucking
MikeMc Posted June 2, 2011 Posted June 2, 2011 Stach? do you mean pictures of the fifty COE or more of the Cord. if you mean the fifty Ford I can but do i want to put them in this thread? the Fifty is on hold for now to almost finish the Cord as i want to make my mistakes on it ( a learning experience for sure) i am making it up as i go.. if i open the hood on the Fifty i will scribe/cut it open and tilt it forward on one big hinge i think but for now it's a closed deal.. man it's a lot of sanding i need a small scale DA and shuffle board. i might chop the top a bit on it i don't know.(the 50 that is).. and i have not decided what type the bed might be.. i like where your going with yours. keep on trucking Nope I meant the hood on the cord. It looks great...I just noticed your 50 Ford...different post I just love the front treatnent that the cord has!!!!
stewart Posted June 2, 2011 Posted June 2, 2011 Nice. Great job so far. Can't wait to see this finished. STewart
spad007 Posted June 9, 2011 Author Posted June 9, 2011 I have the bed part assembled and the first coat of primer caned on for a guide coat. the car tray is painted steel with chrome mixed in might clear it maybe." Or not." any who here are some more shots.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now