leereyn Posted June 24, 2009 Posted June 24, 2009 you have a wife and a girlfriend???? you lucky sucker!!! Nice 'vette It's a wife and two girlfriends. Technically a girlfriend and a half, but if the wife hadn't left I woudn't have been able to buy the Vette or the El Camino. Kind of like the man who told a friend that his wife left and took his dog and he was going to miss the dog.....
jjsipes Posted June 24, 2009 Posted June 24, 2009 I have a 1993 Dodge Dakota Club Cab wit ha 318 from the factory. Runs Great looks better than new. No digital pics of it. Have had it for 11 years. About 2 months ago my special order from Dodge came in. Back in Feb. I went and placed an order for a 2009 Dodge Challenger R/T Classic. I ordered it in B5 Blue. It has '71 inspired strips and 20" Crager mags. It only has the 5.7L Hemi with 371 horse and 401 lbs. torque (which is plenty for the street). It is awesome. I can go out in traffic and almost cause accidents with people turning there heads to get a look. Some people have stopped in on coming traffic to look (and almost get rear ended). No digital pics of these either but here is one just like it.
Rudy Posted June 24, 2009 Posted June 24, 2009 My DD is a turd. My Toy is below. It is an 87 Mustang LX Notchback, I completely built the whole car over the last 5 years. See the pic at the very bottom to see what I started with. I have posted pics of it before, but I just got done with a whole bunch of new modifications. It has 4.6L 4 valve, out of an 03-04 Cobra. This is a pretty rare swap, I onlyt knew of 3 other ones in the country when I started building it. I run a C-4 trans, built by Joel's On Joy, here in Detroit. (Detoilet) THe latest round of upgrades are as follows: New Whipple 3.4L twin screw supercharger (replaced factory 03-04 cobra eaton) Ford Racing 80 Lb injectors (replaced factory 39 lb'rs) Accufab 160mm Monoblade throttlebody (replaced factory twin 52mm T/B) Custom Pro-M mass air, calibrated to flow-matched injectors Reflashed the Continental Stall convertor, done by Lenny at Ultimate Convertor Concepts Custom fabbed Air-aintake piping New Afco Dual-pass heat exchanger New Strange Engineering front coilovers New bumpsteer kit Removed and relocated rack mounts to correct steering geometry Afco Rear Coilovers Team-Z Anti Roll-bar Cut apart and refabricated BBK longtube headers to properly clear steering shaft (finally!) Aerospace rear disc brakes New Strange Pro-Race axles to replace the last set I somehow bent More I am forgetting On the Dynojet Chassis Dyno, she made 768 Rear-wheel horsepower, 737 Ft/Lb of torque. 940hp at the crank. THis was on a fairly mild street tune, at 26.5lbs of boost. THe old heat exchanger was in place at the time of dyno'ing, and it was too small and bent up from an accident (new brakelines I actually farmed out, they did not tighten one fitting, finger loose, POW!) so the Intake Air temperature went from 0-170 degrees in 9 seconds, which is BAD BAD BAD. It was way too hot, and we didnt want to push our luck without replacing the Heat exchanger with the new afco dual pass unit. We never re-dyno'd the car after replacing it, but I know on some C-16 race gas there is 1,000 hp at the crank, and over 800 rwhp at the wheels. She should go 9.0's to high 8's in the 1/4 this year, at over 150mph. Guess its time for a parachute. But this is a street car, I drive it every chance I get in the summer!!! NEVER GIVE UP........................ Rudy
Rudy Posted June 24, 2009 Posted June 24, 2009 I have a 1993 Dodge Dakota Club Cab wit ha 318 from the factory. Runs Great looks better than new. No digital pics of it. Have had it for 11 years. About 2 months ago my special order from Dodge came in. Back in Feb. I went and placed an order for a 2009 Dodge Challenger R/T Classic. I ordered it in B5 Blue. It has '71 inspired strips and 20" Crager mags. It only has the 5.7L Hemi with 371 horse and 401 lbs. torque (which is plenty for the street). It is awesome. I can go out in traffic and almost cause accidents with people turning there heads to get a look. Some people have stopped in on coming traffic to look (and almost get rear ended). No digital pics of these either but here is one just like it. I was so excited to hear they came out with B5 blue again!!!!! Awesome car. SOOOOOOOOOOOO much better looking than the camaro. IMO the only thing a new challnger could use a a slight (maybe 1.5-2") lowering job. They look slightly 4x4ish to me...... Rudy
loudcherokee Posted July 3, 2009 Posted July 3, 2009 For the last 3 1/2 years I've been driving this: 2004 Impala SS 3.8L Supercharged V6 K&N Air Filter Drilled/slotted rotors Red Calipers Indy Grille JVC Head unit Fosgate 6 1/2 components in the front doors Fosgate 1" tweets flush mounted in the top of the doors just behind the A pillars Fosgate three way 6x9s in the back deck Fosgate 12" Punch with custom built box in the trunk California Profile 1000x1 for the subs California 1000x4 for the high end After the warranty runs out, I plan on doing a full exhaust job, smaller supercharger pulley, cold air intake, PCM re-program, and possibly some suspension work. My first car was a 1985 Toyota pickup with a 4 speed manual. That thing was AWESOME, and I wish I never got rid of it. It had the 22r engine, and when I traded it, it had 205,000 miles, and STILL ran like a scalded dog. I only traded it because I wrecked it, spent tons of money on the parts to fix it myself, did all the bodywork, parts, welding, cutting, etc, ready for paint, and then wrecked it again. Stupid deer. I hit a doe on December 23rd, and I was hoping to get the money for Christmas to have it painted. LC
loudcherokee Posted July 3, 2009 Posted July 3, 2009 And here is my project car if I can ever get my rear end down to TN to trailer it back up here to PA. 1970 4 door Impala with a 350 - As you can tell, it needs some TLC. The floor pans and trunk pans are still good though! Here's my dream list - but painted like this: And the cars I would LOVE to have LC
Blue coyote Posted July 3, 2009 Posted July 3, 2009 Not sure why I've not posted this... the Rat Snake 78 King Cobra Black on Black T-top 5.0/C4 (4-speed waiting to be installed) Offy Dial-A-Flow intake Holley 600 4bbl Power steering delete Flex-a-Lite electric fan 74 header panel and hood 225/50R15's on 15x7 Centerlines up front 295/50R15's on 15x10 Centerlines under the rear Trim by Duplicolor Metalcast Blue And yes, the fender badges are coyotes!
ViperDave Posted July 3, 2009 Posted July 3, 2009 My driver for the past 5 years, a 1995 Lincoln Mark VIII. Two door, RWD, rides on air, and has an all aluminum 4.6L DOHC V-8 My son has one just like that. He replaced the leaking bags with coil-overs.
Car Crazy 81 Posted July 16, 2009 Posted July 16, 2009 Heres my daily driver its a 2000 Honda Accord EX Sedan with a 2.3 Liter 4 Banger its not much but it gets 27 MPG in the city and 32 MPG on the highway it has 62,000 miles on it.
Denis Posted July 16, 2009 Posted July 16, 2009 My ride is a 1984 Oldsmobile Toronado, ( sorry no pics ) that now has 311,000 kms on it. Bought it in 93 for 8 grand CDN and down through the years have probably put double that into it in repairs. My trade in on it was a 1977 Plymouth Gran Fury Brougham 2dr hdtp. Should have keep the Fury.
cdansie Posted July 18, 2009 Posted July 18, 2009 This is our "weekend driver" We do about 4000 miles a year attending different events and just driving and here it is with an alternate set of whitewalls Chris
Dingo Posted July 18, 2009 Posted July 18, 2009 A bit of sad news about the Falcon Wagon, it got it's heart crushed about 3 weeks ago now the poor old gal had, had enough and she blew her motor coz it was going to cost too much to repair the our lad bought another Falcon but a sedan this time and the old wagon went to the crusher, oh well she did well she was built in the mid 80's and went for some 20 odd years before falling over and breaking her motor. Dingo
Custom Hearse Posted July 18, 2009 Posted July 18, 2009 My daily driver.... Finally got the decals and glue off of it. I've been adding different things to the interior. Now I need to get it re-painted.... Anybody need a ride?
Nick F40 Posted July 19, 2009 Posted July 19, 2009 My new ride! I know some of you will be amazed, astonished and surprised A mint 1985 GTI! Grassroots Motorsports for life! I think a few SCCA goodies are in hold in the near future, can you say ITBs?
Hakan ERYILMAZ Posted July 29, 2009 Posted July 29, 2009 Hi guys. My name is Hakan from Ä°stanbul.This my first reply. This my father car. 1954 Ply Savoy and my car Audi 2006 A8 Quattro L
8valve Posted July 29, 2009 Posted July 29, 2009 My new ride! I know some of you will be amazed, astonished and surprised A mint 1985 GTI! Grassroots Motorsports for life! I think a few SCCA goodies are in hold in the near future, can you say ITBs? great car, Nick! Of course, I'm biased! Best of luck with her.......keep us posted on progress!
Nick F40 Posted August 2, 2009 Posted August 2, 2009 thanks, yeah I'm not sure if you are or not..... It suits your name also, it of course has 8 valves of fury! ohhhh I definetly will, some rally lights, skid plat, megasquirt and ITB's are planned
Corvette.Jeff Posted September 4, 2009 Posted September 4, 2009 (edited) I saw some bikes on here so i thought i'd post mine. The ten speed is a 75' gicante' TdF with mostly shimano components a stronglight crank and sprocket, stronglight headset, Sr stem and handlebars, bontrager speed tires and tubes, and araya wheels. The bmx a friend gave to me after we built our twelfth bike together, i have no clue about anything on it, just that it weighs 25 pounds Edited September 4, 2009 by ThatOneEmoKid
Greg Cullinan Posted September 4, 2009 Posted September 4, 2009 (edited) I dont like to waste space so I have a ride for every scenario: When I go out alone, 1992 Harley Sportster,unkown mileage When two of us go out, 04 Mustang GT 25,000 mies And when the whole fam rolls, 01 Ford Expedition 5.4 60,000 miles Edited September 4, 2009 by ponyxpress
Lownslow Posted September 5, 2009 Posted September 5, 2009 got bored and got sick of loosing myself in traffic. ill have a new car to screw up before this is done
Jon Cole Posted September 7, 2009 Posted September 7, 2009 My ol' girl passed away from New England Cancer, rotted out the rocker panels, and all four torsion bars need replacement, and front axle joints too. I hate to see it go. I had her for over ten years. Friday, we took delivery on a 2004 Passat W8 4motion. Man, she's sweet! I didn't even know Volkswagen made a V8!
Nick F40 Posted September 7, 2009 Posted September 7, 2009 (edited) Well, I guess it's technically a V. Yeah those engines sound SWEET! A friend of mine has a clip of one with the exhaust open when they had one in the shop. I did some modifications to my car, Raceland Race Coilovers... it still needs a few tweaks........and alignment Edited September 7, 2009 by Nick F40
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now