Chris White Posted January 1, 2013 Share Posted January 1, 2013 anybody have any tips for airbrushing, using propel cans? Can't afford compressor yet. They keep giving a blast of cold air when the airbrush sits for a moment. Quote Link to comment Share on other sites More sharing options...
Swamp Dog Posted January 1, 2013 Share Posted January 1, 2013 anybody have any tips for airbrushing, using propel cans? Can't afford compressor yet. They keep giving a blast of cold air when the airbrush sits for a moment. i still use them once in a while..keep the can at room temp.and don't turn it up all the way ..start of at a low pressure...then increase it...that's the way i do it.. Quote Link to comment Share on other sites More sharing options...
Guest G Holding Posted January 2, 2013 Share Posted January 2, 2013 Keep it in a warm water bath....if you know when an "issue" is going to happen, plan for it. Or get a different air supply Quote Link to comment Share on other sites More sharing options...
my80malibu Posted January 2, 2013 Share Posted January 2, 2013 I would guess, that for what your paying for those propellant cans, you could afford a small compressor from Harbor fright, or some knockoff store in a relatively short time. I found a 2.5 gallon setup at a sears outlet store for under fifty. just look around maybe craigslist can help. Quote Link to comment Share on other sites More sharing options...
Aeroteto Posted January 2, 2013 Share Posted January 2, 2013 an alternative is to use a spare tire. You can inflate it at a gas station for free and use the compressed air, until you can save some money for a compressor. Quote Link to comment Share on other sites More sharing options...
Chris White Posted January 2, 2013 Author Share Posted January 2, 2013 Thanks guys those are some good suggestion. But the general idea is , "suck it up and buy a compressor". Any suggestions Quote Link to comment Share on other sites More sharing options...
Chris White Posted February 7, 2013 Author Share Posted February 7, 2013 Look what I just bought !!!!! Quote Link to comment Share on other sites More sharing options...
my80malibu Posted February 7, 2013 Share Posted February 7, 2013 That looks like it will work for you, congratulations. Quote Link to comment Share on other sites More sharing options...
LoneWolf15 Posted February 7, 2013 Share Posted February 7, 2013 Chris , Buy another inline filter , install it between the compressor outlet and your airbrush hose . The filter that is on the compressor will fill up far quicker with moisture then you would ever begin to believe . Quote Link to comment Share on other sites More sharing options...
Chris White Posted February 7, 2013 Author Share Posted February 7, 2013 Thanks I will do that, I appreciate any advise give. If anyone wants to come over. I buying beer Sorry given Quote Link to comment Share on other sites More sharing options...
hooterville75 Posted February 8, 2013 Share Posted February 8, 2013 Donn, this might sound like a stupid question but I have ZERO maintenance knowledge ha ha. Is it a easy process to change the pressure regulator and install a moisture control trap on a air compressor ? I use a Craftsman Air Compressor and would like to put both of these items on new as the compressor is at least 15 years old with neither ever being replaced. Ive tried to research how to change these items online but cant seem to find a tutorial or step by step anywhere. If I cant find out how to do it myself within the next couple weeks I guess a trip to Compressed Air is in store ha ha. Quote Link to comment Share on other sites More sharing options...
Chris White Posted February 8, 2013 Author Share Posted February 8, 2013 Don't worry Donn if I can do it, you can do it. Its like plumbing, use plumbers tape around the threads and screw it together. Be sure its tight, but not overtightened. Turn it on and look for leaks. Use soapy water, it will bubble where the leaks are. Hope it helps. My moto is "how hard could it be ?????" "if I break it????? so be it" Quote Link to comment Share on other sites More sharing options...
LoneWolf15 Posted February 8, 2013 Share Posted February 8, 2013 (edited) It's not difficult , believe me ! Take the assembly off of your compressor and take it with you to the store . Explain to the employee what you want to do and they'll help you out . You might have to buy a few black iron pipe nipples and fittings for the retrofit along with the new moisture trap , and as indicated , a roll of Teflon tape . Two small pipe wrenches are the only tools that are required , or you can use 2 Channel Lock pliers in a pinch ! Edited February 8, 2013 by LoneWolf15 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.