TFchronos Posted March 11, 2013 Share Posted March 11, 2013 (edited) Hello everyone, this is a new build I started it's one of my entries for this years Cannonball Run cbp as the title says it's a 32 Ford Sedan Street Rod from Revell. I plan to build it as a custom Hot Rod that will house two 426 Hemi's, chop the top, and do a few other things that I'll keep secret for now. I haven't really decided on a color yet, I'm thinking about a nice candy apple red but it's subject to change. I just started to build the frame, I thought it would be better to build a frame rather than extend the original. So after some planing, burnt fingers and a few choice words this is what I got. This is also my first attempt at a custom frame so we'll see where it goes. That's where it's at right now, I'll start re-building a 67 GTX soon for the same contest, I just want to get this a little further along seeings how this is uncharted water for me. Thanks for looking! Edited November 29, 2013 by TFchronos Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted March 11, 2013 Share Posted March 11, 2013 Nice thorough planning. That's gonna be a lot of motor. Quote Link to comment Share on other sites More sharing options...
wrecker388 Posted March 12, 2013 Share Posted March 12, 2013 Two Hemi's?!? How are you gonna keep it on the ground?! Quote Link to comment Share on other sites More sharing options...
Dragfreak Posted March 12, 2013 Share Posted March 12, 2013 Beautiful work on that frame!! Quote Link to comment Share on other sites More sharing options...
TFchronos Posted March 15, 2013 Author Share Posted March 15, 2013 Nice thorough planning. That's gonna be a lot of motor. Thanks! Two Hemi's?!? How are you gonna keep it on the ground?! I'm still working on that part. Beautiful work on that frame!! Thanks! Quote Link to comment Share on other sites More sharing options...
TFchronos Posted March 15, 2013 Author Share Posted March 15, 2013 (edited) Quick update, There was a slight oversight made when I measured the width of the frame, my measurements were made using the out side of the body not the inside. The frame also sat higher in the rear than I wanted so after separating it and a little modification the problem was solved and I'm happy with it now. The front brace is only taped on for now, I still don't know exactly where the engines will sit. After a little mock up test on the differential I think it's too narrow for what I want so I've been modding a slightly wider differential for a little bit wider stance in the back. Sorry for the size difference I was messing around with the settings a little. After looking at the picture I just realized that the shock mount on the left is a little crooked so I'll have to fix that. Thanks for looking! Edited March 15, 2013 by TFchronos Quote Link to comment Share on other sites More sharing options...
TFchronos Posted March 22, 2013 Author Share Posted March 22, 2013 Here's another little update, it's going pretty smooth for now the differential is in so now it can stand on it's own. And Here it is, the tires are from a 67 Chevelle pro street but I got these by themselves online. I must say I'm happy to see it sitting on it's tires like this not looking like a complete tragedy. lol Thanks for looking! Quote Link to comment Share on other sites More sharing options...
TooOld Posted March 22, 2013 Share Posted March 22, 2013 Lookin' really good , Jonathan ! Nice work on the frame , it should be a hairy ride with 2 Hemi motors ! Your camera is a great tool ! Take pictures of everything you do and study the photos . You'll see stuff you never saw while building it ! Quote Link to comment Share on other sites More sharing options...
torinobradley Posted March 22, 2013 Share Posted March 22, 2013 This is looking like the HotWheel Way 2 Fast. Is that your inspiration? I'll be watching this one. Keep up the good work! Quote Link to comment Share on other sites More sharing options...
TFchronos Posted March 23, 2013 Author Share Posted March 23, 2013 Lookin' really good , Jonathan ! Nice work on the frame , it should be a hairy ride with 2 Hemi motors ! Your camera is a great tool ! Take pictures of everything you do and study the photos . You'll see stuff you never saw while building it ! Thanks, it's amazing what can be seen in a picture that was missed in real life. This is looking like the HotWheel Way 2 Fast. Is that your inspiration? I'll be watching this one. Keep up the good work! Yeah the Way 2 Fast was a big inspiration but I also wanted to do it because I haven't seen one done before. Quote Link to comment Share on other sites More sharing options...
TFchronos Posted March 24, 2013 Author Share Posted March 24, 2013 (edited) Today with the help of my good friends Knife, File, and Sandpaper the tranny from the front engine was removed and setup to link the engines together. Both engines are from 67 GTX's. I have 2 because when I tried to build one 7 - 8 odd years ago as my second or third build ever I messed it up somehow. I don't really remember but either the paint screwed up or something fell on it. In any case the body was toast. Wal-Mart at the time had all their models clearanced out for like 5 bucks so I just got another and that's how I ended up with 2 identical engines. Anyway that's the story behind the engines now here are some pictures, starting with engine #1 Engine #2 And here they are linked up, I tried my hand at making a flywheel for engine #1 but it didn't turn out to well so I may end up redoing it later on Thanks for looking! Edited March 24, 2013 by TFchronos Quote Link to comment Share on other sites More sharing options...
TFchronos Posted April 7, 2013 Author Share Posted April 7, 2013 (edited) Update time, not much done though just the motor mounts, some bracing and mounts for the trailing arms. And that's all for now. Edited April 7, 2013 by TFchronos Quote Link to comment Share on other sites More sharing options...
Ira Posted April 7, 2013 Share Posted April 7, 2013 GREAT PROJECT!!! Nice Progress.. Quote Link to comment Share on other sites More sharing options...
greasymodels Posted April 7, 2013 Share Posted April 7, 2013 this is going to be a sick 32 when your done!! awsome skills!! Quote Link to comment Share on other sites More sharing options...
TFchronos Posted April 8, 2013 Author Share Posted April 8, 2013 GREAT PROJECT!!! Nice Progress.. Thanks Ira this is going to be a sick 32 when your done!! awsome skills!! Thanks Joshua Quote Link to comment Share on other sites More sharing options...
Bigfordguy Posted April 8, 2013 Share Posted April 8, 2013 This looks like it will be a cool project Quote Link to comment Share on other sites More sharing options...
Gramps2u Posted April 8, 2013 Share Posted April 8, 2013 The driver of that wicked machine is going to need a flight suit! Loving the frame work. Quote Link to comment Share on other sites More sharing options...
TFchronos Posted April 12, 2013 Author Share Posted April 12, 2013 This looks like it will be a cool project Thanks! The driver of that wicked machine is going to need a flight suit! Loving the frame work. Ha ha, yep, thanks! Quote Link to comment Share on other sites More sharing options...
TFchronos Posted April 12, 2013 Author Share Posted April 12, 2013 The final braces for the frame are done, now onto working on the body. Quote Link to comment Share on other sites More sharing options...
TFchronos Posted April 18, 2013 Author Share Posted April 18, 2013 Started and finished work on the fuel tank, that's about it. I haven't been able to do much due to my allergies, it's hard to work on something when you can't see it lol. Anyway work on the body has been put on hold for now do to that. As seen in this last picture I've also been working on the floor board so if my allergies let up a little I'll see about finishing that up. Thanks for looking! Quote Link to comment Share on other sites More sharing options...
TFchronos Posted April 26, 2013 Author Share Posted April 26, 2013 Update time after a short break I got back to it and finished up the floor boards. I also made a coupler (of sorts) for the engines. Now I'm on to doing some body work, thanks for looking! Quote Link to comment Share on other sites More sharing options...
Dragfreak Posted April 26, 2013 Share Posted April 26, 2013 floor boards look good, nice job! Quote Link to comment Share on other sites More sharing options...
Michaels Models Posted April 27, 2013 Share Posted April 27, 2013 Wow this is a great build to watch. Doing a very nice job, and can't wait to see the end result. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted April 27, 2013 Share Posted April 27, 2013 (edited) Jonathan why are you using two accessory drive systems (i.e. alternator) ? Edited April 27, 2013 by Greg Myers Quote Link to comment Share on other sites More sharing options...
PowerPlant Posted April 27, 2013 Share Posted April 27, 2013 Whoa! I thought I read twin Hemi And that fuel-tank is madness! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.